Grid View:
In Stock
Quickview

1.6 LITER 4 CYLINDER KENT BLOCK (M-6010-16K)

(0)

The legendary Formula Ford Kent block is reborn with an all new iron casting that is stronger than the original! The block was designed to replace production 1.6L Kent blocks for SCCA Formula Ford competition. Standard 8.200-INCH deck height with extra material for decking Cylinder bores semi-finished to 3.185-INCH - 3.187-INCH diameter to allow t..

$1,325.00
In Stock
Quickview

2.0L I-4 ECOBOOST ENGINE KIT (M-6007-20T) 2013-2014

(0)

Engine from 2013-2014 Ford Focus ST Production rating of 252 Horsepower @ 5,500 RPM Production rating of 270 lb. ft. of torque @ 3,000 RPM When used with Engine Control Pack M-6017-20T and 93 octane unleaded fuel, torque is increased 90 lb. ft at 2800 RPM - with a significant increase up to 4200 RPM. See the power curve for PN M-6017-20T ..

$7,000.00
In Stock
Quickview

2.3L ECOBOOST MUSTANG CYLINDER BLOCK (M-6010-23T)

(0)

Production Mustang 2.3L EcoBoost cylinder block Includes plugs, dowels and other production hardware for buildup Also available for an EcoBoost engine build are: M-6303-23EB 2.3L EcoBoost Crankshaft M-6049-M23 2.3L Mustang EcoBoost Cylinder Head..

$875.00
In Stock
Quickview

289-351 SLANT EDGE FORD RACING VALVE COVER (302-139)

(0)

Fits 289/302/351W Die-cast aluminum with baffle Chrome finish Recessed Ford Racing logo Not designed for use on factory 5.0L EFI intake manifold Will clear stud girdle and roller rocker arms (3.35-inch tall) Includes long bolts for center upper bolt hole (1 per valve cover) Includes oil fill cap grommets 50-States Street Legal when installed with a..

$320.00
In Stock
Quickview

302 CUBIC INCH MAHLE FORGED PISTONS .030 OVERSIZE -SET OF 8 (M-6067-M52)

(0)

Mahle PN: SBF600030F06 Bore (in): 4.030 in. Bore (mm): 102.362mm Piston Style: Flat top, with two valve reliefs Piston Material: Forged aluminum Compression Distance (in): 1.600 in. Piston Head Volume (cc): +6.60cc Wrist Pin Style: Press-fit - no circ clip grooves Pin Diameter (in): 0.912 in. Ring Set: File Fit Top Ring Thickness: 1.5mm Top Ring Ma..

$180.00
In Stock
Quickview

302 HEAD GASKET AND BOLT KIT (M-6051-D50)

(0)

Fits: Pushrod 302 Ford production engines. Two expanded graphite head gaskets. Compressed thickness 045-in. The compressed volume 9.7 cc's. The gasket bore size 4.100-in. Includes 9 short head bolts, 10 long head bolts, 1 short head bolt with stud. Recommended for high performance applications when using a stock block...

$77.00
In Stock
Quickview

302/351W Z-HEAD ALUMINUM 63CC W/7MM VALVES (M-6049-Z304D7)

(0)

For assembled head see M-6049-Z304DA7 Fits 302/351 Windsor engines This cylinder head was designed using Solid Modeling Technology Cast from prime A356 T6 aluminum Heads are cast with high-flow ports 20 degree inline valves Suggested valve sizes: 2.02" intake and 1.60" exhaust Requires competition valve job and bowl blending Steel alloy intake and..

$770.00
In Stock
Quickview

374 MAHLE PISTON - EAGLE H-BEAM ROD KIT (M-9000-374RP)

(0)

Mahle forged piston and ring pack – 4.125-inch bore Flat top, with two valve reliefs Compression Distance (in): 1.245 in. 0.927-inch pin 1.5mm/1.5mm/3.0mm ring pack Eagle H-Beam steel connecting rod – 6.200-inch length - 2.100-inch rod journal size - Eagle PN CRS6200B3D Use with M-6303-374 374 FORGED CRANKSHAFT..

$715.00
In Stock
Quickview

4.6L STROKER PISTON AND RING SET

(0)

..

$375.00
In Stock
Quickview

460 ALUMINUM VALVE COVER SATIN BLACK (M-6582-B460)

(0)

Fits 429/460 Die-cast aluminum with baffle Satin Black Finish Will clear stud girdle and roller rocker arms (5.75-inch tall) Includes oil fill cap and grommets 50-States Street Legal when installed with appropriate closed PCV hardware..

$264.00
In Stock
Quickview

460/460 FORD RACING SINGLE PLANE INTAKE MANIFOLD (M-9424-C460)

(0)

460/460 FORD RACING SINGLE PLANE INTAKE MANIFOLD For use with 10.322 deck height block and M-6049-C460 "wedge" race heads 8.64" carburetor pad height High-RPM power For use on drag race engines..

$665.00
In Stock
Quickview

5.0L COYOTE ALUMINATOR NA SHORT (M-6009-A50NAA)

(0)

Just like the fully built up engines, Aluminator Short Blocks are hand assembled and use Manley connecting rods with ARP rod bolts and Mahle® forged pistons. Two versions are available – 9.5 and 11.0:1 compression ratio. These Aluminator Short Blocks serve as a strong foundation for the enthusiast that wants to spec and finish a Coyote build ..

$5,995.00
In Stock
Quickview

5.0L COYOTE ALUMINATOR SC CRATE ENGINE (M-6007-A50SCA) 2015-2016

(0)

The Ford Performance 5.0L Coyote Aluminator crate engine is a modern 5.0L 32-valve DOHC V-8 that uses advanced features like Twin Independent Variable Camshaft Timing (Ti-VCT) to deliver big power. Unlike the factory 5.0L engine, the Aluminator is built with low compression forged pistons and H-beam connecting rods to meet the demands of forced in..

$10,395.00
In Stock
Quickview

5.0L COYOTE ALUMINATOR SC SHORT BLOCK (M-6009-A50SCA)

(0)

Just like the fully built up engines, Aluminator Short Blocks are hand assembled and use Manley connecting rods with ARP rod bolts and Mahle® forged pistons. Two versions are available – 9.5: and 11.0:1 compression ratio. These Aluminator Short Blocks serve as a strong foundation for the enthusiast that wants to spec and finish a Coyote build..

$5,995.00
In Stock
Quickview

5.0L COYOTE AUTOMATIC TRANSMISSION FLEXPLATE BOLTS (M-6379-M50A)

(0)

Set of 8 one-time use torque-to-yield production flexplate bolts..

$29.00
Showing 1 to 15 of 68 (5 Pages)