Grid View:
Quickview

"FORD PERFORMANCE" 50 -FT. PENNANT STRING (M-1827-P2)

(0)

Ford Performance pennant string 50 feet long String of rectangular, plus pennant flags branded "Ford Performance" Great for any race track, car show, or Gearhead's garage..

$60.00
Quickview

1.6 LITER 4 CYLINDER KENT BLOCK (M-6010-16K)

(0)

The legendary Formula Ford Kent block is reborn with an all new iron casting that is stronger than the original! The block was designed to replace production 1.6L Kent blocks for SCCA Formula Ford competition. Standard 8.200-INCH deck height with extra material for decking Cylinder bores semi-finished to 3.185-INCH - 3.187-INCH diameter to allow t..

$1,325.00
Quickview

460 ALUMINUM VALVE COVER SATIN BLACK (M-6582-B460)

(0)

Fits 429/460 Die-cast aluminum with baffle Satin Black Finish Will clear stud girdle and roller rocker arms (5.75-inch tall) Includes oil fill cap and grommets 50-States Street Legal when installed with appropriate closed PCV hardware..

$264.00
Quickview

5.0L COYOTE ALUMINATOR NA SHORT (M-6009-A50NAA)

(0)

Just like the fully built up engines, Aluminator Short Blocks are hand assembled and use Manley connecting rods with ARP rod bolts and Mahle® forged pistons. Two versions are available – 9.5 and 11.0:1 compression ratio. These Aluminator Short Blocks serve as a strong foundation for the enthusiast that wants to spec and finish a Coyote build to ..

$5,995.00
Quickview

5.0L COYOTE ALUMINATOR SC SHORT BLOCK (M-6009-A50SCA)

(0)

Just like the fully built up engines, Aluminator Short Blocks are hand assembled and use Manley connecting rods with ARP rod bolts and Mahle® forged pistons. Two versions are available – 9.5: and 11.0:1 compression ratio. These Aluminator Short Blocks serve as a strong foundation for the enthusiast that wants to spec and finish a Coyote build to..

$5,995.00
Quickview

5.0L COYOTE FRONT & CAM COVER KIT (M-6580-M50) 2011-2017

(0)

This kit provides the front and top end sealing components for 2011-2015 5.0L 4V Ti-VCT Coyote engine build projects. Kit includes these parts: OIL FILL CAP (Quantity - 1) LH CRANKCASE VENT FITTING..

$465.00
Quickview

5.0L COYOTE MOTOR MOUNT (M-6038-M50) 2011-2015

(0)

Fits 2011-2015 5.0L Mustang GT engines• Coyote engine mount kit for engine swaps• Includes cast aluminum engine brackets engine mounts and hardware..

$149.00
Quickview

5.0L COYOTE OIL LINE ADAPTOR (M-6881-M50A) 2015-2017

(0)

Fits 2015-2017 5.0L Coyote Engines Blue anodized billet aluminum oil line adapter replaces oil filter adapter Allows installation of remote mounted oil filter and oil cooler Includes two -12 AN (male) fittings & O-rings Includes adapter to engine block O-ring and mounting bolts Warning: your selection of fittings and filter adapter may restrict oi..

$215.00
Quickview

5.0L COYOTE POWER MODULE 6 SPEED MANUAL (M-9000-PMCM) 2015+

(0)

Complete Modern Powertrain Solution for Any Ford 2015 Mustang GT 5.0L 435 HP Coyote Engine Tremec 6 speed manual transmission Complete Engine Controller and Wiring Harness The crew at Ford Performance have spec'd out a complete kit to simplify the swap of modern 5.0L Coyote power into just about Ford vehicle. The Coyote Power Module teams the Must..

$15,300.00
Quickview

5.2L COYOTE ROLLER FINGER FOLLOWER KIT (M-6564-M52) 2015-2017

(0)

Fits 2015-17 5.2L Coyote engines Full engine set of 32 camshaft roller finger followers..

$525.00
Quickview

6.7L DIESEL INJECTOR NOZZLE AND PUMP KIT (M-9546-67)

(0)

Original Equipment on 2015-2016 6.7L diesel engine Higher flow than prior model injectors Kit includes: Injection Pump (FC3Z-9A543-A) Left Bank nozzles and feed lines (FC3Z-9H529-A) Right bank nozzles and feed lines (FC3Z-9H529-B)..

$2,750.00
Quickview

6.7L TURBO UPGRADE (M-TURBO-67) 2015-2017

(0)

Replacement 2015-2016 turbo and hardware for 6.7L diesel Higher performance capability than pre-2015 turbos Includes: Turbocharger assembly Lower intake manifold Exhaust heatshield EGR inlet tube Turbo outlet clamps Exhaust outlet tubes (RH & LH) Intake shields Turbo oil line All gaskets including EGR All fasteners, spacer..

$2,650.00
Quickview

7.5-IN RING GEAR INSTALLATION KIT (M-4210-B75) 2012

(0)

Fits all 7.5-inch axles Excellent upgrade for all 7.5-inch rear ends High-torque bearing adds durability for modified vehicles Kit includes: 2012 Shelby GT500 high-torque pinion bearing Pinion and carrier shims Crush sleeve Pinion nut Pinion seal Ring gear bolts Heavy duty carrier bearings Gear-marking compound..

$108.00
Quickview

9.75" AXLE DIFFERENTIAL COVER (M-4033-F975)

(0)

Ford Performance branded differential cover Fits all F-150 with 9.75" differential Rugged powdercoat finish..

$230.00
Quickview

BLACK AND CHROME ECOBOOST EMBLEM (M-1447-EBBLK)

(0)

Black and Chrome ECOBOOST emblem/badge 3-1/2" Long x 9/16" Wide Complement any ECOBOOST-powered hot rod, street rod, or vehicle Can be attached on engine covers, doors, fenders, hatches, hoods, etc. Automotive-grade double sided tape included on back of emblem Kit of 2..

$35.00
Showing 1 to 15 of 57 (4 Pages)