Grid View:
Quickview

7.5-IN RING GEAR INSTALLATION KIT (M-4210-B75) 2012

(0)

Fits all 7.5-inch axles Excellent upgrade for all 7.5-inch rear ends High-torque bearing adds durability for modified vehicles Kit includes: 2012 Shelby GT500 high-torque pinion bearing Pinion and carrier shims Crush sleeve Pinion nut Pinion seal Ring gear bolts Heavy duty carrier bearings Gear-marking compound..

$108.00
Quickview

8.8-IN 3.08 RING AND PINION (M-4209-88308) 1986+

(0)

Ford Racing 8.8-inch Gear Sets No one does 8.8-inch gears better than Ford Performance Racing….stronger and quieter. The 8.8-inch rear end has been the standard in performance since its introduction in the Mustang in 1986 and Ford Racing is the manufacturer of choice when it is time to hop-up your axle.Made in the United States at Ford's Sterling A..

$219.00
Quickview

8.8-IN 3.15 RING AND PINION (M-4209-88315) 1986+

(0)

Ford Racing 8.8-inch Gear Sets No one does 8.8-inch gears better than Ford Racing….stronger and quieter. The 8.8-inch rear end has been the standard in performance since its introduction in the Mustang in 1986 and Ford Racing is the manufacturer of choice when it is time to hop-up your axle.Made in the United States at Ford's Sterling Axle Plant (c..

$225.00
Quickview

8.8-IN 3.27 RING GEAR AND PINION (M-4209-88327) 1979-2010

(0)

Fits all 1979-1985 Mustangs, Mustang V6 applications to 2010 Stronger and quieter that other aftermarket gears. Made in the United States at Ford's Sterling Axle Plant -competitors in our price range are primarily produced in China.OEM quality - our superior surface finish, hardening, and manufacturing consistency provide the strongest and quietest..

$225.00
Quickview

8.8-IN 3.55 RING GEAR AND PINION (M-4209-88355) 1986+

(0)

No one does 8.8-inch gears better than Ford Racing….stronger and quieter. The 8.8-inch rear end has been the standard in performance since its introduction in the Mustang in 1986 and Ford Racing is the manufacturer of choice when it's time to hop-up your axle. Made in the United States at Ford Sterling Axle Plant -competitors in our price range ar..

$225.00
Quickview

8.8-IN TRACTION-LOK REBUILD KIT W- CARBON DISCS (M-4700-C) 2003-2004

(0)

Fits all 8.8-inch Traction-Lok differentialsCarbon fiber discs designed for higher torque usageUsed in 2003-04 Cobra and Mustang GT500 Kit includes:Carbon fiber clutch packShims31 spline S-spring, 28 spline applications require use of 28 spline S-spring not includedDifferential pin lock bolt with thread lockInstruction sheet..

$144.00
Quickview

8.8-IN. ALUM FINNED DIFF COVER - COOLER PORTS (M-4033-KA) 2013

(0)

Original equipment on 2013 Mustang Shelby GT500 with Track Pack option Fits 8.8-inch Ford rear end Recommended for road racing or extended high speed/high temperature applications to reduce gear oil break down, increase gear and bearing life. Cooling fins help reduce gear oil temperature Cover machined for differential cooler pickup and return f..

$205.00
Quickview

8.8-INCH 3.73 RING GEAR AND PINION (M-4209-88373) 1986+

(0)

No one does 8.8-inch gears better than Ford Performance Racing….stronger and quieter. The 8.8-inch rear end has been the standard in performance since its introduction in the Mustang in 1986 and Ford Racing is the manufacturer of choice when its time to hop-up your axle. Made in the United States at Ford Sterling Axle Plant -competitors in our pri..

$225.00
Quickview

8.8-INCH 4.10 RING GEAR AND PINION (M-4209-88410) 1986+

(0)

No one does 8.8-inch gears better than Ford Racing….Stronger and Quieter. The 8.8-inch rear end has been the standard in performance since its introduction in the Mustang in 1986 and Ford Racing is the manufacturer of choice when it's time to hop-up your axle. Made in the United States at Ford Sterling Axle Plant -competitors in our price range are..

$225.00
Quickview

8.8-INCH 4.56 RING GEAR AND PINION (M-4209-88456) 1986+

(0)

No one does 8.8-inch gears better than Ford Racing….stronger and quieter. The 8.8-inch rear end has been the standard in performance since its introduction in the Mustang in 1986 and Ford Racing is the manufacturer of choice when it's time to hop-up your axle. Made in the United States at Ford Sterling Axle Plant -competitors in our price range are..

$285.00
Quickview

8.8-INCH AXLE GIRDLE COVER KIT (M-4033-G2) 1986-2013

(0)

Fits 8.8-inch axle Fits 1986-2004 Mustang GT Low profile design also fits 2005-2013 Mustang GT and 2007-2013 Shelby GT500 Mustang except 2013 Track Pack option Light-weight 356T6 aluminum casting replaces rear cover on 8.8-inch Load bolts provide additional support for differential bearing caps Increase ring and pinion gear life Will not fit IRS s..

$209.00
Quickview

8.8-INCH RING AND PINION INSTALLATION KIT (M-4210-A) 1986-2013

(0)

Fits all 8.8-inch axles 1986-2013 including IRS Perfect for new gear installation in vehicles when new bearings are not required Kit includes: Pinion and carrier shims Crush sleeve Pinion nut Pinion seal Ring gear bolts Cover gasket..

$41.00
Quickview

8.8-INCH RING GEAR BOLT SET (M-4216-A300) 1986+

(0)

7/16-inch-20 x .875-inch boltsSet of 10 bolts Can also be used for automatic transmission flywheels..

$9.95
Quickview

8.8-INCH TRACTION-LOK REBUILD KIT (M-4700-B)

(0)

Fits all 8.8-inch Traction-Lok differentials Kit includes Clutch packShimsDifferential pin lock bolt with thread lockFriction modifier WR-19546-A1..

$87.00
Quickview

8.80-IN 3.31 RING AND PINION (M-4209-88331)

(0)

Ford Racing 8.8-inch Gear Sets No one does 8.8 -inch gears better than Ford Performance Racing …. stronger and quieter. The 8.8-inch rear end has been the standard in performance since its introduction in the Mustang in 1986 and Ford Racing is the manufacturer of choice when its time to hop-up your axle. Made in the United States at Fords Sterlin..

$225.00
Showing 1 to 15 of 37 (3 Pages)